Not-automated hinged-door gate with metal structure Fe S235JR.

Features:

• Electric lock
• Side support uprights with hinges
• Tubular doors with 12mm diamter lances
• Galvanised and dark-anthracite-painted metal
• Customisable lances and colour painting

Pedestrian gate with metal structure Fe S235JR.

Features:

• Electric lock
• Side support uprights with hinges
• Tubular doors with 12mm diameter lances
• Galvanised and dark-anthracite-painted metal
• Customisable lances and painting colour

Not-automated sliding gate with metal structure Fe S235JR.

Features:

• Electric lock
• Support side uprights
• Slide
• Wheels and support structure for sliding
• Plate for motorisation
• Tubular doors with 12mm diameter lances
• Galvanised and dark-anthracite-painted metal
• Customisable lances and colour painting.

Hinged sheet panel for closing the access to a sailor stair, with 700mm diameter and lock.

Conical roller bearings can bear combined loads, that act at the same in time along radial and axial directions.

Dimensions:

170x310x57mm

Specifications of the bearings:

• Low friction
• Long-lasting practice
• Better operational reliability
• Accordance between rollers profiles and measures
• Break-in time with reduced peaks in temperature
• Decomposable and interchangeable

Axial deep groove ball bearings are designed to bear only axial loads.

Dimensions of the bearings: 280X380X80mm

Specifications of the bearings:

• Decomposable and interchangeable
• Initial misalignment
• Coupling with interference

Rounded bearing for roller support and regreaseable, protected by triple-seal small sheets. 

Areas of application: agriculture, industry and multiple further uses.

Radial deep groove ball bearings are especially versatile: suitable for high and very high speeds, they require low-maintenance activities.

Dimensions: 50x90x20mm

Roller bearings are made of two symettrical roller cages, a shared spherical track in the outer ring and two tracks in the inner ring, with a specific angle regarding the bearing axis.

Dimensions:

80x170x39mm with steel cage.

Specifications:

• Capacity of bearing misalignment
• High load capacity
• Long-lasting practice
• Low friction
• Sturdy

Bent and welded iron sheet flowerpot, that can be customised with corten-like or galvanised steel surface treatment.

Personalised painting with customer-chosen RAL.

Measures:
Down side 300mm
Upper side 400mm
Height 700mm

Flowerpot in bent and weld iron sheet, customisable with corten-like or galvanised steel surface treatment. Personalised painting with custom-chosen RAL.

Measures:

Width 835mm
Height 640mm
Depth 320mm

Motorisation for sliding and door-hinged, underground or external gates.

Gates automation allows to avoid visual impact, at the same time giving the comfort that comes from an automated gate.

Galvanised and painted steel fences, with electrowelded grid, 1x1m module.

Product features:

• Grid 62x132mm
• Plate 25x2mm
• Tubular column 30x30x2mm

Rollers for conveyor belts that are used for conveyors that operate under difficult conditions, with big workloads. Their construction features are low-maintenance.

Typical areas of application are: mines, quarries, cement factories, coal electrical plants and harbour installations.

Rollers are designed for settings with the following features: dusty, protruded, with water, low / high temperature (with frequent heat changes).

Working temperatures are between ​​​​-20°C and + 100°C.

Angular profile support structure, steps and rectangular section in compliance with CE legislation, centrings (rings) of protection in 50x5 plate with 700mm diameter, adjustable wall-fixing stirrups.

• 1,2m stair module (+ access and exit included)